speaker

All posts tagged speaker

I was recently sent the PocketBoom Rechargeable Bluetooth Portable Speaker for review from the guys over at KitSound.  This is one product I was looking forward to getting to grips with.  Check out the unboxing video below.

Setting the speaker up for use was an easy task.  simply power on the PocketBoom speaker and put your phone/device into visible mode.  Your device should pick up the speaker after a few seconds – once it has, choose the speaker from the list of available devices and it should pair up.  If you run into any issues when it comes to pairing the devices, check out the included user manual and you should be sorted in no time.

The sound that the PocketBoom pushes out is surprisingly awesome!  For such a small device, I was not expecting what I heard.  The speaker pushes out a decent amount of bass as well, but depending on what device you are using it with, you may want to adjust the levels on the device itself beforehand to get the best sound out of things – even if you download an equalizer app or something to help with this, it is definitely worth it.

Because the speaker also doubles up as a hands-free device, I was itching to try out both the incoming, and outgoing sound quality.  When a call comes through, simply press the little button on the top of the speaker (the one with the phone icon) and you will be connected.  Incoming call quality through the speaker was great quality and did not come through distorted at all – again, very surprised at the quality.  Outgoing voice was a little on the quiet side when listening through the phone, but I could still hear what was going on.  This was easily rectified by rotating the speaker a little so that the small microphone port was facing the person talking rather than facing the opposite way.

The small rubber section on the bass of the speaker provided a decent amount of grip when the speaker was placed on a surface.  Pressing the buttons, etc, did not cause the speaker to move about unnecessarily, something else that I really liked.  The overall design of the speaker is very easy on the eye and definitely something that you would not be embarrassed to be seen with.

Having the option to connect up a 3.5 to 3.5mm cable is handy, especially if you have been using the PocketBoom for a prolonged period of time via bluetooth and the battery is starting to get low – you can still use the speaker if you are not ready to power down just yet.  When it comes to recharging the speaker, simply connect up the Micro USB cable and plug in the other end of the cable to a PC or laptop, or even a USB mains adapter.  I have used the speaker and managed to get around 3 hours of continuous play from it before having to charge again.

This tiny speaker really does pack a punch when it comes to playing music.  No matter what style of music you choose to play, it comes through nice and clear, and with a decent amount of bass.  The hands-free feature just adds to this little box of awesome and makes using it an absolute pleasure.  You can pick up the PocketBoom Rechargeable Bluetooth Speaker in a wide range of colours and for the price of around £30.00 GBP.  An excellent product at an affordable price.

Today for review, I have quite a cute item.  It’s a Mini Buddy Portable Speaker from the guys over at KitSound.  There are several different characters and designs available, and I have the Heart speaker to review.  Perfect timing with Valentine’s Day just around the corner.

The packaging for the Mini Buddy Heart Speaker is simple and shows you what you want to know.  It is just big enough to fit the speaker in, as well as the included USB charger cable.  The packaging is a clear plastic style that gives you a decent view of the speaker so that you can see the design fully.

ksheart1

The speaker itself is actually really cute to look at.  It is a nice pink colour with a love heart pattern on the front which is made up of several small heart shapes.  On the side of the speaker there is a female 3.5mm port so that you can connect more than one together if you would like, while on the back is where the sound comes out, so naturally, there are several small holes for the speaker itself.  On the bottom of the buddy there is the power switch and a Micro USB port for the charger cable.  On the top, there is a short keychain that enables you to connect it up to your keys, which when coupled with the build quality of the speaker, you can feel assured that you can just throw it into your bag and not worry about causing any damage, etc.  Lastly, you have the 6 inch 3.5mm jack cable.

To get the speaker up and running, it couldn’t be easier – really.  Simply plug in the 3.5mm jack to the audio device that you want to use it with and you are good to go.  I plugged it into my phone and started up my music streaming app to test things out.  The sound quality was actually pretty good, especially considering the size of it.  The music I was playing came through nice and clear, and I didn’t notice any distortion.  I was able to enjoy my music listening session without feeling disappointed about my choice of speaker and the fact that you can actually hook up more of these little things together can only add to your listening pleasure.  Saying this, I was listening to music that didn’t contain a ridiculous amount of bass.

ksheart2

Since first hooking up this buddy to charge when I took it out of the packaging, I haven’t had to charge it again, despite using it for a fair few hours.  This is something that has impressed me as I would hate to have to charge it over and over again after short uses.  One thing that is worth a mention – when charging, the LED indicator on the bottom of te buddy stays blue.  I think it may have been handy to have the LED colour change between charging and charged.

Overall, I think this Mini Buddy Hear Portable Speaker is cute, very well made, and very well priced.  You can pick up this speaker for £9.99 GBP from the KitSound website, as well as on Amazon UK.  With Valentine’s Day just around the corner, this would make an ideal gift for your love interest/significant other.

With the amount of stuff that I keep on my desk, my phone often suffers by being laid beneath pieces of paper or under my monitor. I was lucky enough to receive a WaveCradle Low Profile stand for my phone to review which hopefully, will stop this from happening in the future as well as adding something a bit different.

The WaveCradle Low Profile is a phone stand that is made from high quality, sturdy, aircraft grade aluminium. It also has two metal rods that are attached to the back to hold the device up right and these rods also pass through to the front of the device and are used to place your phone on. The WaveCradle is built very well and the way it has been designed prevents is from tipping over whilst being used.

wc4

On my iPhone, the speaker sound quality has always been bad. This is something that I have encountered previously also, so having something that could change that is a plus.

When I have my phone sat on the WaveCradle, it is held in place by the specialised rubber grip that is located on the front of the curved aluminium plate. The plate itself curves at the bottom which in turn enhances any audio that comes out of the speakers which are located on the bottom of the phone. This audio is very clear and crisp and can be heard clearly up to 20 feet away.

The clear sound can be heard when you are looking head on at the stand, but not so much from the side. This is understandable though due to the design of the stand. Also, this stand is in no way as loud as an actual speaker, but you can most definitely tell the difference between using it and not using it.

wc3

On the bottom of the curved plate you will find a rubber bottom that prevents the WaveCradle from slipping whilst on your desk, and also protects your desk from any scuff marks that may occur.

The only downside is the fact that there is no dedicated space to run the charging cable through. Aside from this though, I have no issues with the device.

Overall, I think that the WaveCradle Low Profile is a handy product especially if you find yourself short of space. The WaveCradle Low Profile is available for around $20USD and you have a choice of three colours – black, blue and pink.  You can also get the WaveCradle Classic, all details are available on their website.